Small aperture low voltage, thermally protected, specification grade recessed housing. Meets all national air flow requirements. Housing: Die-formed aluminum Heat dissipation and rust protection Junction Box: Eight 0.5" KOs Four Romex KO True pry-out slots ETL listed
- Material : Aluminum
- Transformer Type : Electronic
- Construction Type : New
- Dimmable : No
- Bar Hangers : 12" - 24" joist span, Connect w/out nails / screws, Fits T-bar spline
- Adjustable : Horizontal, Vertical
- Knockouts : 4 x 1/2", 4 x Romex
- Approval Type : ETL - Damp Location, ETL - Direct contact w/insulation, ETL - Feed through wiring, C-ETL - Damp Location
- Recessed Size : 5 Inch
- Length : 12.625" (320.68mm)
- Height : 7.0" (177.8mm)
- Width : 5.75" (146.05mm)
Item Type : Recessed Housing
Item Style : Remodel
Manufacturer : USA Light & Electric
Warranty : 1-year Limited
Voltage Type : 120 Volt
Input Voltage : 120
Max. Watts : 13
Features : Air Tight Rated, Energy Star Compliant, IC Rated, Thermally Protected, Title 24 Compliant
Additional Features
Thermally Protected remodel compact fluorescent IC housing.
Integral fluorescent ballast.
Wire through junction box.
Preinstalled adjustable Bar Hanger.
Dependable, favorable design and effortless installation.
7 1/4" height allows use in 2"x 8" joist construction.
Gasket to prevent air flow from heated or air conditioned spaces.
Meets all national air flow requirements.
Designed for Remodel Construction where housing will be in contact with insulation.
Thermally protected, specification grade compact fluorescent Air-Shut rated housing. Made for existing construction where insulation will be touching housing. IC and AT rated.
Meets California Title 24 requirements
Electronic Ballast
Accommodates 13w TTT 4 pin lamp
LAMP WATTAGE: (1) Maximum 13W TT/TRT
Thermally protected, IC rated specification grade remodel compact fluorescent recessed housing. For new installations where housing will be in direct contact with insulation. Accommodates (1) 4-pin Compact fluorescent lamp. For fast and easy installation in existing plaster or mechanical ceilings from 1/2" to 1-3/ thick. Four remodel clips are easily retractable for fixture removal if necessary. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
This HB5PLRIC-13-E-AT-AD is our professional recessed lighting fixture. Unlike other recessed fixtures it features 4 knockouts specifically designed for use with Romex wiring. Each knockout has a wire strain relief to insure that the wire does not back out once installed. In this application the 1/2" standard screw in cable clamps are not required. This "quick installation" feature is favored by professional installers. Housing can be used on either long or short axis of housing and can be shortened for 12" joists.They are designed to be hammered directly without using nails or screws and could be fit onto T-bar spline for easy installation and quick alignment.
|
