Learn more about USA Light.com on DIY Network USALight.com featured on House Crashers on DIY Network USALight.com featured on Bath Crashers on DIY Network USALight.com featured on Yard Crashers on DIY Network
Electronic Commerce

  Home > Items > Housings >

  6" Air Tight Fluorescent 13 watt IC Fluorescent Housing

6" Air Tight Fluorescent 13 watt IC Fluorescent


 
Alternative Views:


Our Price: $37.00


Qty:

Description Technical Specs Downloads
 
The USALight.com 6" Energy Star Air Tight IC Compact 13 watt fluorescent recessed housing (Title 24 compliant).

Small aperture low voltage, thermally protected, specification grade recessed housing.
This is a Title 24 IC and "air tight" rated fixture and has a gasket to prevent air flow from heated or air conditioned spaces. Meets all national air flow requirements. Only use 4" trims as shown on this web site.

Housing:
Accommodates lamps one 13w PL double twin tube compact fluorescent lamp
Outer housing composed of die-formed aluminum

Ballast:
Thermally protected current controlled
Increases lamp life with no noise or flicker

Bar Hangers:
Pre-installed
12.0" - 24.0"
90 degree pivoting mounting plate
Bar hangers can fit onto T-bar spline
Additional slots for custom mounting

Junction Box:
Four 0.5" KOs
One 0.75" KO
Four Romex KO
True pry-out slots
Strain clamps
ETL and C-ETL listed

NEVER use a dimmer on this housing

They are designed to be hammered directly without using nails or screws and could be fit into a standard T-Bar spline for easy installation and quick alignment.
Features

  • Part Number: US-REC436



    • HOUSING - Die formed aluminum construction for for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceilings.
    • SOCKET - One vertically mounted plug-in socket for PL lamp. Preinstalled on an adjustable mounting bracket to allow for proper and consistent lamp positioning.
    • JUNCTION BOX - is ETL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
    • BALLAST - Thermally protected, current controlled electric ballast, will produce full light output, increase lamp life with no noise and flicker. Domestic brand ballast.
    • BAR HANGERS - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span. They can be used on either long or short axis of housing and can be shortened for 12" joists. They are designed to be hammered directly without using nails or screws and could be fit onto T-Bar spline for easy installation and quick alignment.
  •  
  • Lighting Chart