Wattage: 50w
Input Voltage: 120v
Bulb Type: PAR30, R30, BR30 - Incandescent or LED light bulbs

Length: 16.0" - 24.0" (406.4mm - 610mm)
Width: 9.0" (228.6mm)
Height: 7.5" (190.5mm)

UL and C-UL listed
ETL and C-ETL listed
For wet location use
For direct contact with insulation

• Material : Aluminum
• Construction Type : New
• Dimmable : Yes
• Bar Hangers : 16" - 24" joist span
• Knockouts : 4 x 1/2", 4 x Romex
• Adjustable Pitch Ranges from 2/12 to 6/12
• Approval Type : UL, UL - Damp location, UL - Feed-through wiring
• Recessed Size : 6 Inch
• Length : 16"-24" (406.4mm - 610mm)
• Height : 7.5" (190.5mm)
• Width : 9" (228.6mm)

Item Type : Recessed Housing
Item Style : New Construction, Sloped
Warranty : 1-year Limited
Bulb Included : None
Compatible Bulbs : BR30, PAR30 Long Neck, PAR30 Short Neck, R30
Voltage Type : 120 Volt
Input Voltage : 120
Output Voltage : 120
Max. Watts : 75
Features : Air Tight Rated, IC Rated, Thermally Protected

Additional Features
75W Max Rated. For use with PAR30 or R30 Lamp
UL, C-UL listed for damp location and feed through wiring.
For use where the ceiling pitch ranges from 2-1/2" to 6-1/2".
Thermally protected against misuse of insulation and improper lamping.
J-box is listed for through-branch circuit wiring, 4 in 4 out (5) 1/2"knockouts, and (4) Romex knockouts with strain clamps.
The socked swivels to align lamp and allows lamp to be aimed straight down regardless of ceiling pitch.
Pre-installed bar hangers allow the housing to be positioned at any point within 16" -24" joists span.
Bar hangers can be turned 90° on the plaster frame.
Bar hangers are designed to fit T-bar spine without additional clamps for use in drop ceilings.
Housing adjusts to accommodate up to 1" ceiling thickness.
7-1/2" height allows use in 2" x 8" Joist construction.

This RX-306ICAT is our professional recessed lighting fixture. Unlike other recessed fixtures it features 4 knockouts specifically designed for use with Romex wiring. Each knockout has a wire strain relief to insure that the wire does not back out once installed. In this application the 1/2" standard screw in cable clamps are not required. This "quick installation" feature is favored by professional installers. 75W Max Rated. UL, C-UL listed for damp location and feed through wiring, and direct contact with insulation. Thermally protected against improper lamping. J-box is listed for through-branch circuit wiring, 4 in 4 out, and (5) 1/2" knockouts, and (4) Romex Knockouts with strain clamps. Adjustable socket bracket plate for proper positioning of different lamp types. Pre-installed bar hangers allow the housing to be positioned at any point within 24" Joists span. Bar hangers can be turned 90° on the plaster frame. Bar hangers are designed to fit T-bar spine without additional clamps for use in drop ceilings. Housing adjusts to accommodate up to 1" ceiling thickness. 7 1/2" height allows use in 2" x 8" Joist construction.