www.USALight.com
My Account
View Cart
1.877.235.0020
Our Company
About Us
Returns
Shipping
Site Help / FAQ
Social
Tweet
Electronic Commerce
Home
>
Housings
>
6" Compact Fluorescent Non-IC Housing - 26 Watt with Battery Backup
Alternative Views:
Price:
$151.50
Qty:
Description
Technical Specs
Downloads
Part Number: US-R6CFLBB2668
Wattage: 26w
Input Voltage: MVOLT
Bulb Type: Fluorescent Double Twin Tube - quad
Bulb Base: Gx24q-3, 4-pin
Ballast: Electronic
Length: 12.0" - 24.0" (305mm - 610mm)
Width: 7" (178mm)
Height: 7.25" (184.15mm)
1 year limited factory warranty
*Energy Star
Emergency Battery Pack (EMG 750):
Emergency battery pack with remote test switch. Operates maximum single lamp 42W TRT or double lamp 32W TRT in emergency mode with battery backup in case of power failure.
Transformer Type : Electronic
Construction Type : New
Dimmable : No
Bar Hangers : 12" - 24" joist span, Connect w/out nails / screws, Fits T-bar spline, Pre-Installed
Adjustable : Fixed
Knockouts : 4 x 1/2", 4 x Romex
Approval Type : UL, UL - Damp location, UL - Direct contact with insulation, UL - Feed-through wiring, C-UL - Damp location, C-UL - Direct contact with insulation, C-UL - Feed-through wiring
Recessed Size : 6 Inch
Length : 12.0" - 24.0" (305mm - 610mm)
Height : 7.25" (184.15mm)
Width : 7" (178mm)
Item Type : Recessed Housing
Item Style : New Construction
Manufacturer : USA Light & Electric
Warranty : 1-year Limited
Voltage Type : MVOLT
Input Voltage : 120
Output Voltage : MVOLT
Max. Watts : 42
Features : Air Tight Rated, Energy Star Compliant, IC Rated, Thermally Protected, Title 24 Compliant
Additional Features
Thermally Protected compact fluorescent IC Housing.
Integral fluorescent ballast.
Thermally protected against improper lamping.
Adjustable Socket bracket.
Wire through junction box.
Pre-installed adjustable Bar Hanger.
6" height allows use in most 2"X6" Joist construction.
Dependable, favorable design and effortless installation.
7 1/4" height allows use in 2"x 8" joist construction.
Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
Gasket to prevent air flow from heated or air conditioned spaces.
Meets all national air flow requirements.
Air leakage less than 2.0 CFM when tested in accordance with ASTM E283
Meets California Title 24 requirements
Electronic Ballast
Accommodates 26w TTT 4 pin lamp
LAMP WATTAGE: (1) Maximum 26W TT/TRT
Thermally protected, specification grade compact fluorescent IC housing. For new construction where housing will be in direct contact with insulation. Accommodates (1) 26/32 4-pin Compact fluorescent lamp. Furnished with pre-installed adjustable bar hangers.Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
Features
HOUSING - Die formed aluminum construction for for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceilings.
SOCKET - One vertically mounted plug-in socket for PL lamp. Preinstalled on an adjustable mounting bracket to allow for proper and consistent lamp positioning.
JUNCTION BOX - is ETL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps
BALLAST - Thermally protected, current controlled electric ballast, will produce full light output, increase lamp life with no noise and flicker. Domestic brand ballast.
AR HANGERS - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span. They can be used on either long or short axis of housing and can be shortened for 12" joists. They are designed to be hammered directly without using nails or screws and could be fit onto T-Bar spline for easy installation and quick alignment.
Share your knowledge of this product.
Be the first to write a review »