Home > Yes >

6" Recessed LED Downlight Kit - 13 Watt - 4000K


Sylvania 72331
CUSTOMER REVIEWS

 
Alternative Views:


Price: $22.00
Sale Price: $10.00
Savings: $12.00
4 REMAINING AT THIS PRICE AS OF 7/26/17

Stock Status:OUT OF STOCK - CALL CUSTOMER SERVICE FOR RESTOCK DATE

Qty:

Description Technical Specs Shipping Time
 
Sylvania Part Number: 72331
Description:
LED-RT6-900-840-FL80-OEM

Creates high performing white light and is optimized for new construction and retrofit applications.
Installation is done quickly and easily in most standard six-inch Insulated Ceiling (IC) housings, Airtight (AT) housings and non-IC housings.
Dimmable to 10% with standard120V electronic low voltage dimmers (recommended), incandescent or magnetic low voltage dimmers. In some cases, standard incandescent dimmers require a minimum load of typically >40 watts on the circuit for full range dimming performance (four LED modules). For dimming with digital (smart) multi-location dimmers or when dimming fewer than four LED modules, electronic low-voltage (ELV) dimmers are required (some ELV dimmers need a neutral connection in the wallbox).
• 900 lumens @ 13 watts
• Replacement for up to 100W incandescent lamps
• Fits into most 6" recessed downlight fixtures
• Color temperature 4000K
• CRI: 83
• Dimmable to 10%
• 50,000 hour life (L70)
• Suitable for indoor and outdoor dry, damp and wet locations
• Reduces energy consumption up to 87%
• 120V input voltage
• Lasts up to 25 times longer than incandescent lamps
• No warm-up time, instant-on with full light output and stable lamp to lamp color
• Meets California Title 24 fixture requirements for high efficacy luminaire
• Integrated white trim and medium base socket adaptor (included) for direct replacement
Application Notes

1. Operating temperature range between -4°F and 104°F (-20°C and 40°C).
2. Suitable for indoor and outdoor dr y, damp and wet loca tions.
3. Suitable for dimmers or in housings controlled by a dimmer . For a list of compatible dimmers, please refer to www.sylvania.com/RT6 .
4. Not intended for use with emergenc y light fixtures or exit lights.
5. For use in housings that can structurally support a lamp weighing one pound.
6. For detailed warranty information, please refer to www.sylvania.com/RT6 .

Related Items
ELCO EL770ICA - 6" LED Air Tight IC Line Voltage Recessed Housing - New Construction USALight US-106-R-ICAT-LED - 6" LED Air Tight IC Line Voltage Recessed Housing - Remodel
Price: $14.19

Add
Price: $10.95

Add
ELCO EL770ICA USALight US-106-R-ICAT-LED

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 11 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Led Lights April 13, 2015
Reviewer: Vinnie Zarndt from Naponee, NE United States  
Always on time at a great price. Easy to install. Thanks Again

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 6" Recessed LED Downlight Kit - 13 Watt - 4000K January 29, 2015
Reviewer: Cheryl Van Nuil from St Petersburg, FL United States  
Installed perfectly... The only thing I forgot to include was a LED dimmer switch. The old dimmer switch and the new LED bulbs don't play well together... Otherwise 3 installed without a problem

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 LED Lights June 3, 2014
Reviewer: Tom Carlson from Rock Island, IL.  
Bought these LED retro kits and they worked great and look nice.
Thanks again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 6" Recessed LED Downlight Kit - 13 Watt - 4000K April 29, 2014
Reviewer: Anonymous Person from NORTH ROYALTON, OH United States  
just as promised, fast shipper too...

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 6" Recessed LED Downlight Kit - 13 Watt - 4000K March 20, 2014
Reviewer: Anonymous Person from Shreveport, LA United States  
The lights were as listed. I was looking for a clean bright white light, not soft white or warm white and these were the correct ones. The only suggestion I would have is people need to look at their can depth. These were for a 6" can and they fit but you must move the socket to the furthest height/depth to allow room for these lights to fit in the can. I have some remodel cans that I want to put these lights in, but the cans are to short. I may have to look at another kit for these.

RESPONSE FROM USALIGHT.COM - We recommend that the socket plates be completely removed to accommodate the LED modules, and not only adjusted to the highest point.  This should aid in installation, and proper fit.

Was this review helpful to you?

View All Customer Reviews