CLIPS
Four remodel tension clips secure the housing to the ceiling.
JUNCTION BOX
Pre-wired junction box with 7 1/2” knockouts with pryout slots and (4) romex knockouts with built-in strain relief to hold wire in place without any connectors. Junction box is equipped with grounding wire. Listed for through branch circuit.
HOUSING
Vertically adjustable (up to 1”) which allows housing to be push with ceiling.
FEATURES
- UL / cUL listed for damp location, feed-through wiring, and direct contact with insulation
- Thermally protected against misuse of insulation materials and improper lamping
- Sealed housing to prevent airfow from air conditioned or heated areas into ceiling
- Housing adjusts to accomodate various ceiling thickness
- Loose socket
- Can be dimmed using standard incandescent dimmer
LISTINGS
UL/cUL Listed for feed through and damp location.
LAMP & SOCKET
Medium base porcelain with nickel plated copper screw shell socket. Maximum of 75W.
DESCRIPTION
5” Line voltage 120V Remodel IC Airtight Housing. Can be in direct contact with insulation.
PLASTER FRAME
22 gauge die-formed galvanized mounting frame with regressed locking screw for securing barhangers.
INSTALLATION
- 7 3/4” height allows the fixture to be installed where 2x6 joist exists
- Housing can be installed below the ceiling
- Four remodeling tension clips can accommodate 1/2” to 1-3/8” thick ceilings
- Comes with quick connectors which makes wiring connection easy. No wire nuts necessary.
Recessed cans 
