4" Miniature Compact Fluorescent GU24 IC Remodel Housing

• Dependable, favorable design and effortless installation.

• Unit slips through 4-1/4” ceiling opening.

• Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2” to 1-3/8”.

• Can be installed from below the ceiling.

• 6-1/8” height allows use in 2”x 8” joist construction.

Small aperture thermally protected, specification grade recessed housing. For remodel IC rated applications. For fast and easy installation in existing plaster or mechanical ceilings from 1/2” to 1-3/8” thick. Four remodel clips are easily retractable for fixture removal if necessary. Junction box is provided with eight 1/2” KOs and four Romex knockouts with strain relief.

Accommodates up to 19W GU24 lamps.

SPECIFICATION:

A. HOUSING - High temperature painted 22 gauge deep drawn single piece housing. Accommodate lamps up to 19W depending on trim used.

B. SOCKET- GU24 BASE is screwed to the top of housing but can be removed to snap into socket supporting trims.

C. INSTALLATION - Four Preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2” to 1-3/8”.

D. JUNCTION BOX - UL and ETL for feed through wiring with eight 1/2” KOs and four Romex knockouts with strain

relief.

E. THERMAL PROTECTION - Standard thermal protection device guards against improper installation, overlamping and misuse of insulation material.