• Thermally Protected IC housing.
• Designed for accent and task lighting applications.
• Wire through junction box.
• Preinstalled adjustable bar hanger.
• Dependable, favorable design and effortless installation.
• 7” height allows use in 2”x 8” joist construction.
• Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
A. HOUSING - Die-formed all aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2” to 1-3/8” ceiling.
B. SOCKET - GU24 BASE is screwed to the top of housing but can be removed to snap into socket supporting trims.
C. BAR HANGERS - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24” joist span. They can be positioned on either the long or short axis of the housing and can be shortened for 12” joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20º downward angle for better contact, and the 90º pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
D. JUNCTION BOX - UL and ETL listed for through-branch circuit wiring and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pry-out slots and strain clamps.
E. THERMAL PROTECTION - Standard thermal protection device guards against improper installation, overlamping and misuse of insulation material.