Home > Recessed Lighting > Four Inch Recessed Lighting > Four Inch Recessed 12 volt >

4" Low Voltage Noise Free Non-IC Shallow Remodel Housing - 35W - MR16 - White


BL4RE-S-35W-AT-W
CUSTOMER REVIEWS

 
Alternative Views:


Price: $75.55

Stock Status: In Stock

Qty:

Description Technical Specs Shipping Time
 
Part Number: US-REL4-R-E-S

Dimmable

Wattage - 35W
MAX Input Voltage - 120v
Output Voltage - 12v
Bulb Type - MR16 (not included)
Color Temp/Lumens - Based on Bulb Choice
Transformer - Electronic

Length - 11"
Height - 3.625"
Width - 4.375"

1 year limited factory warranty.

Small aperture, low voltage, thermally protected, remodel shallow housing. For fast and easy installation in existing plaster or mechanical ceilings from ½" to 1-3/8" thick. Four remodel clips are easily retractable for fixture removal if necessary. Accommodates up to 35W MR16 lamps. Junction box is provided with eight ½" KOs and four Romex knockouts with strain relief.
Features

  • HOUSING
    - High temperature painted 22 gauge deep drawn single piece housing. Accommodates lamps up to 35W depending on trim used.

    TRANSFORMER - Class II dimming electronic transformer enhanced in heat dissipating cover attached to junction box cover.

    BAR HANGERS - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact, and the 90° pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.

    INSTALLATION - Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thickness from ½" to 1-3/8".

    JUNCTION BOX - ETL listed for damp location and has eight ½" KOs and four Romex knockouts with strain relief.



    • Integral low voltage electronic transformer to eliminate noise and vibration, increasing lamp life and lighting quality.
    • Thermally Protected Non-IC remodel housing.
    • Can be installed from below the ceiling.
    • Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from ½" to 1-3/8".
    • Designed for accent and task lighting applications.
    • Dependable, favorable design and effortless installation.
    • 3-5/8" height allows use in 2" x 4" joist construction.
    • Unit slips through 4-¼" ceiling opening.



  • *Note: Not compatible with LED bulbs as they do not put enough load on the electronic transformer. Will cause premature failure.
    We do not recommend pre-cutting any holes until housings are on site.

Related Items
4" Eyeball Trim - Gimbal Ring 4" Low Voltage Trim - Angle Cut Wall Wash Reflector 4" Baffle Wall Wash - Regressed 4" Stepped Baffle Trim - Regressed
Price: $21.34

Add
Price: $26.40

Add
Price: $16.75

Add
Price: $12.99

Add
B1461WH | 4" Eyeball Trim - Gimbal Ring | USALight.com B1463W-WH | 4" Trim - Angle Cut Wall Wash Reflector | USALight.com B1416W | 4" Baffle Wall Wash - Regressed | USALight.com B1401W-WH | 4" Stepped Baffle Trim - Regressed | USALight.com

Share your knowledge of this product. Be the first to write a review »