 |
 |
 |
 |
|
 |
|
Features
- Technical Details
Construction: Double Wall IC Rated for direct contact with insulation. For use in IC and non-IC conditions. Up to 1,100 lumens. Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Installation: Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists. Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information. For use with ELCO Tunable White Koto LED Light Engines (ELK19TWD Series).
Junction Box: Positioned to accommodate straight conduit runs. Two (2) 3/4" knockouts. Seven (7) 1/2" trade size conduit knockouts. One (1) 3/8" knockout. Four (4) Pry-out knockout slots for easy Romex installation.
Hanger Bars: Pre installed hanger bars with True Nail easy installation in regular lumber, engineered lumbar, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while easily aligning the housings with the joists.
Electrical: Driver is rated for 120V and 277V input(120/277V). High Efficiency driver with a power factor >0.95.
Driver Options:
- Standard: Integrated dual channel 0-10V Dimming, no control module required. Not compatible with control module ETW3 Series.
Dimmability: 0-10V dimming in one driver. 0-10V dimming down to 5% with a compatible dimmer. Can be specified with Lutron drivers for 0.1% and 1% dimming. For a full list of dimmers refer to the Dimmer Compatibility List.
|
|
|
|
|
|
|
