 |
 |
 |
|
Part Number: E24V770ICA
24V DC 6" New Construction Dedicated IC Airtight Housing. Compatible with ELCO 24V DC Koto Modules.
Wattage - 24w Max.
Voltage - 24v DC
Compatible With - 24V DC Koto Modules Only!
Modules and Trims Sold Separately!
Height - 7"
Width - 7"
Length - 9 1/2"
- Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
- IC Airtight for direct contact with insulation, for use in IC and non-IC applications
- Compatible with 24V DC Koto Modules Only (sold separately)
- Simple installation with 24V Wire
- cUL Listed, cUL for Damp Location, cUL Listed for Wet Location with select trims, cUL Listed for Feed Through, cUL Listed for Direct Contact with Insulation and Combustible Material, Airtight per ASTM E-283, Install a JA8-2022-E lamp for Title 24 Compliance, Energy Star Certified
- 5 year limited factory warranty
 
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
| Input Voltage | -
| 24V DC | -
-
-
- Construction Type
-
| -
- New Construction
| -
-
-
| Wattage | -
| 24 Watt Max. | -
-
-
- Compatible With
| -
| 24V DC Koto Modules and Trims (sold separately) | -
-
-
- Knockouts
-
| -
| Seven (7) 1/2" Trade Size Conduit, Four (4) 3/4" Knockouts, Four (4) Romex Pry-Outs with Strain Relief | -
-
-
| Warranty | -
| 5 Year Limited Factory Warranty | -
-
-
- Recessed Size
| -
6 Inch-
| -
-
-
| Manufacturer | -
| ELCO Lighting | -
-
-
- Hanger Bars
| -
| Pre-Installed | -
-
-
| Rated | -
- Single Wall IC Rated For Direct Contact with Insulation, IC and NON-IC Conditions
| -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Bulb Type: 24V DC KOTO MODULES ONLY
Housing
▪ Single wall IC rated for direct contact with insulation, for use in IC and NON-IC conditions.
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts with pry-out knockout slots, Four (4) Romex pry-outs with strain relief.
▪ Ground wire provided on J-Box
Hanger Bars / New Construction
▪ Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars.
▪ Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Installation
▪ Designed for ceiling plenums where 2 x 6 joists or taller are used. High strength hanger bars can easily be nailed to joists. Maximum hole cut-out is 6 1/4". Suitable for T-grid and drop ceiling applications. Trim-less applications require access from above the ceiling for servicing the fixture after installation.
Electrical
▪ Input Voltage - 24V DC, Inherently protected.
Lamp
▪ Designed for use with ELCO 24V DC Koto Module and trims.
|
|
|
|
|
|
|
