Home > Interior Lighting > Recessed Lighting >

ELCO E2699LDRICEA - 3" Remodel Housing - 12W Max. - 120V - Electronic Transformer - For 12V Bi-Pin MR16 LED - Silver/Black

ELCO E2699LDRICEA
CUSTOMER REVIEWS

  
Alternative Views:


Download The Spec Sheet
Price: $49.55
EVERYDAY LOWEST PRICE REGARDLESS OF QUANTITY!

Stock Status: In Stock

Qty:

Description Technical Specs Shipping Time
 
Part Number: E2699LDRICEA

3" Remodel Housing for 12V Bi-Pin MR16 LED with Electronic Transformer. ELCO Alpine System Housings.

Compatible With: ELCO Low Voltage MR16 Trims. Sold Separately!

Wattage - 12w Max.
Voltage - 120v
Bulb Type - MR16 GU/GX5.3 bi-pin LED
Electronic Transformer
Dimming - ELV Type

Height - 5 3/8"
Length - 13 1/2"

  • Single Wall IC construction, for use in insulated ceilings, IC and Non-IC conditions
  • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
  • Dimmability based on lamp: Use Only Dimmers Specifically Designed for use with Electronic Transformers.
  • No minimum load issues; Low Voltage Luminaires may produce audible sound when used with dimmers
  • Trims and inserts sold separately; Lamp: MR16 GU/GX5.3 Bi-Pin LED/Halogen (Not Included)
  • 3 year factory warranty (limited)
  • UL Listed for Damp Locations/Wet Locations with select trims
  • UL Listed for Direct Contact with insulation and Combustible materials
  • UL Listed for Feed Through
  • Airtight per ASTM E-283
  • Install a JA8-2016-E lamp/luminaire for Title 24 compliance
Features

  • Construction/Installation
    ▪ Single Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions.
    ▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Maximum hole cutout is 3 3/4".
    ▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
    ▪ Designed for ceiling plenums where 2x6 joists or taller are used. Aluminum Housing. Suitable for T-grid and drop ceiling applications.

    Electrical
    ▪ Input Voltage: 120VAC. Output Voltage: 12V AC. Max Wattage: 12W Max. Thermally protected against improper lamping. No Minimum Load.

    Dimmability
    ▪ Based on lamp selection. Electronic Transformer dims with ELV type dimmers. Lamp used may affect dimmability.

    Compatible Trims/Lamp
    ▪ Compatible with - ELCO Low Voltage MR16 Trims; Designed For Use With GU5.3 MR16 LED Lamps: Sold Separately!

    Listing
    ▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
    ▪ Airtight per ASTM E-283. Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance
    ▪ UL Listed for Direct Contact with Insulation and Combustible Materials.

Share your knowledge of this product. Be the first to write a review »