 |
 |
 |
|
Part Number: E2LAJ11ICAD
Dimmable/0-10V/Triac/ELV
R60 Specialty housing for spray in insulation. Easy-Pull driver included on frame. To be used with Teak LED Light engines only.
Compatible Trims: Teak System Light Engines Only - E2L10, E2L14, E2L13, E2L15, E2L18, E2L19, E2L97 Series
Wattage - 13.7w
Voltage - 120/277v
Lumens - 1,100lm
Dimmable - 0-10V/Triac/ELV
Height - 5 1/2"
Width - 7 5/8"
Length - 12 5/8"
Power up your new construction lighting with the high-performance ELCO E2LAJ11ICAD Teak Recessed Housing from USA Light.
- Provides increased brightness with 13.7W power output.
- Features R60 IC Airtight rating for maximum safety and efficiency.
- Offers universal voltage (120/277V) and versatile 0-10V/Triac/ELV dimming.
This robust 2-inch recessed housing is designed for projects where you need more light output combined with maximum control, perfect for achieving the best recessed lighting. Its universal voltage and comprehensive dimming make it ideal for commercial spaces or high-ceiling residential areas needing the best interior lighting that integrates flawlessly with advanced control systems. The IC/Airtight design ensures energy savings, supporting efficiency goals for best exterior lighting. Why shop with us? USA Light provides expert guidance, competitive pricing on wholesale light bulbs, and a curated selection of top-quality lighting components like this Teak housing.
- Engineered for ELCO's 2" Teak adjustable light engines.
- Includes adjustable bar hangers for easy installation between joists.
- Combines higher wattage with advanced control features.
- R60 Housing designed especially for spray in insulation
- Frame to be used with Teak Light Engines only
- UL Listed for direct contact with insulation
- Driver specified for 850 lumens (11.8W) or 1,100 lumens (13.7W)
- LED Light Engine sold separately
- Optional 90 minute battery pack available with test indicator switch: Call our customer service line for more info, additional fees apply
- Driver specified for 120V (Triac/ELV) or 120/277V (120V: 0-10V Triac/ELV, 277V 0-10V)
- 5 year factory warranty (limited)
- Damp Location Listed
- Wet Location with Wet Location Teak Light Engines
- JA8-2016-E, UL, and Energy Star Qualified
- Suitable for Chicago Plenum construction
   
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction
▪ IC rated for direct contact with installation, for use in IC and non-IC conditions.
▪ High strength hanger bars can easily be nailed to joists.
▪ Optional Emergency Battery Pack: 90 minutes of light with test indicator switch: Additional Fees Apply
▪ Designed for ceiling plenums where 2x6 joists or taller are used.
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail for easy installation in regular lumber, engineered lumber, and laminated beams. Integral leveling flange allows for single-person installation while easily aligning the housing with joists.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction.
Electrical
▪ Driver is rated for 120V or 120/277V input. High Efficiency driver with a power factor > 0.95.
Dimmability
▪ Option ELV/Triac dimming or 3 in 1 dimming: Triac, ELV, and 0-10V dimming can be specified. Can be specified with Lutron drivers. For full list of dimmers, refer to Compatible Dimmer List here: TEAK DIMMERS.
Compatible Trims
▪ Compatible with ELCO Teak System Light Engines Only - E2L10, E2L13, E2L14, E2L15, E2L18, E2L19, E2L97 Series
Listing
▪ cUL Listed, UL Listed for Damp Location and for Wet Location with WET location light engines
▪ Energy Star Qualified, JA8-2016-E, Suitable for Chicago plenum construction
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
