 |
 |
 |
|
Part Number: E2LC106
2" Non-IC Airtight Housing-New Construction
Trims: Compatible with - E210C06, E213C06, E214C06, E215C06, E218C06, E219C06 Series
Wattage - 9w
Voltage - 120v
Dimmable - Triac/ELV
When your new construction project demands the best recessed lighting, you need the foundational ELCO E2LC106 2" housing from USA Light.
- This 9W unit is designed specifically for new construction applications.
- Its airtight certification ensures you prevent costly energy loss between floors.
- It is Non-IC rated, meaning it must be installed where insulation is kept at least 3 inches away.
This 2-inch recessed housing is the discrete starting point for creating the best interior lighting schemes, providing smooth 120V Triac/ELV dimming for perfect ambiance. While this housing secures your indoor spots, USA Light also equips you for the best exterior lighting projects. We support contractors and homeowners alike, offering everything from single fixtures to wholesale light bulbs for the entire job.
- Before installing the light engine, ensure the junction box wiring is secure.
- Periodically wipe the visible trim (sold separately) with a dry cloth to prevent dust from dulling the light.
- Always verify that your dimmer switches are rated for Triac/ELV loads to prevent flickering and ensure driver longevity.
- Height allows for 2x4 construction
- Works with 120v Triac and ELV type dimmers
- Aluminum housing for greater heat dissipation. Stamped galvanized steel frame
- Driver included on housing
- LED Light Engine sold separately
- Fireproof and Battery Backup with ELCO accessories: Sold Separately!
- U.S. Patent 10,281,131
- 5 year factory warranty (limited)
- UL Listed for Wet Location
- UL Listed for Feed Through
- Meets restricted airflow requirements (per ASTM-283)
 
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction
▪ Height allows for 2x4 construction. Suitable for T-grid and drop ceiling applications
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
▪ Aluminum housing for greater heat dissipation. Stamped galvanized steel frame
▪ Driver mounted on junction box for cooler LED operation. Designed for shallow ceiling plenums where 2x4 joists or taller are used
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Two 1/4" trade size pry-out knockouts with conduit fitting provided
▪ See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail easy installation in regular lumber, engineered lumber and laminated beams. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 2 5/8"
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction
Electrical
▪ Driver connects to 120V power supply. High Efficiency driver with a power factor > 0.9.
Dimmability
▪ Works with 120V Triac and ELV type dimmers. Dims down to 10%. For full list of dimmers, refer to Compatible Dimmer List.
Compatible Trims
▪ Compatible with - E210C06, E213C06, E214C06, E215C06, E218C06, E219C06
Listing
▪ UL Listed for Wet Locations
▪ Meets restricted airflow requirements (per ASTM-283)
▪ UL Listed for Feed Through
|
|
|
|
|
|
|
