 |
 |
 |
|
Part Number: E2LK34ICA
Koto Architectural Shallow Maximum Adjustability IC Airtight Housing: 120V (Triac/ELV) or 120/277V (0-10V/Triac/ELV) with optional Emergency Battery Backup.
Trims: Must Be Used With ELCO Koto Architectural LED Light Engines (ELK19 & ELK21 Series Only). Lumen output based on module!
Wattage - 14.7w
Voltage - 120v
Lumens - 1,000lm (ELK19) or 1,200lm (ELK21)
Dimmable - Triac/ELV
Height - 3 3/8"
Width - 7 3/4"
Length - 12"
Working with tight ceiling spaces? The ELCO E2LK34ICA Koto Architectural Shallow Recessed Housing from USA Light is your specialized solution.
- Part of the precision Koto Architectural line.
- Features a Shallow housing design for limited plenum depth.
- Offers "Maximum Adjustability" for highly flexible light direction.
This 14.7W, 120V recessed housing is uniquely designed for achieving the best recessed lighting where vertical space above the ceiling is minimal. Its shallow profile makes it perfect for residential uses like multi-story homes or basement renovations, and commercial uses such as offices with extensive ductwork. You still get the aiming precision needed for the best interior lighting accents, plus IC/Airtight safety and energy efficiency, which supports your best exterior lighting goals. Dimming is easy with Triac/ELV controls.
- Specifically engineered for installations with restricted ceiling depth.
- Provides architectural-grade aiming even in shallow spaces.
- IC-rated and Airtight for safety and maximum energy savings.
Find these problem-solving housings and great deals on wholesale light bulbs at USA Light.
- Single Wall IC Airtight for direct contact with insulation
- Easy-to-Remove driver
- USA designed and assembled
- Flicker Free Dimming
- Optional: 90 minutes, 120/277 VAC, 60Hz, Emergency Backup: Sold Separately!
- 5 year factory warranty (limited)
- UL Listed for Damp Locations and Wet Locations with Select Trims
- UL Listed for Direct Contact with insulation and Combustible materials
- UL Listed for Feed Through
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
| Lumens | -
| 1,000LM (ELK19) OR 1,200LM (ELK21) | -
-
-
- Construction Type
-
| -
| Shallow Maximum Adjustability IC Airtight Housing | -
-
-
| Hanger Bars | -
- Spans Up To 24" And Can Be Repositioned 90°
-
| -
-
-
- Dimmability
-
| -
- Triac/ELV
| -
-
-
- Warranty
-
| -
- 5 Year Factory Warranty (limited)
-
| -
-
-
- Knockouts
-
| -
| Seven (7) 1/2" Trade Size Conduit Knockouts, Two (2) 3/4" Knockouts, One (1) 3/8" Knockout, Four (4) Pry-Out Knockout Slots | -
-
-
- Approval Type
-
| -
| UL - Damp Locations, UL - Wet location (with Select Trims), UL Listed for Feed through, UL Listed For Direct Contact | -
-
-
- Recessed Size
-
| -
- 2"
| -
-
-
- Wattage
-
| -
| 14.7 Watts | -
-
-
- Voltage Rating
-
| -
- 120V
| -
-
-
| Manufacturer | -
| ELCO/USA Designed and Assembled | -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction
▪ Single Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions. Up to 1,100lm.
▪ Housing accommodates up to 5/8" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Two (2) 3/4" knockouts, One (1) 3/8" knockout.
▪ Four (4) Pry-out knockout slots for easy Romex installation. See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Driver is rated for 120V and 277V input (120/277V). High efficiency driver with a power factor >0.95. Note that double wall housings require access from above ceiling for battery maintenance.
Dimmability
▪ 3-in-1 dimming. Triac, ELV and 0-10V dimming in one driver. 0-10V dimming down to 5% with a compatible dimmer. Can be specified with Lutron drivers for 0.1% and 1% dimming.
Compatible Trims
▪ Compatible with - For use with ELCO Koto Architectural LED Light Engines (ELK21 Series Only).
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims.
▪ UL Listed for Feed Through.
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
