 |
 |
 |
|
Part Number: E2LK57RICA
2" IC Airtight Remodel Housing For Architectural Koto LED Engine: Koto Architectural Housing: 120V Triac/ELV.
Trims: Must Be Used With ELCO Architectural Koto LED Light Engines (ELK19 or ELK21 Series).
Wattage - 10.5w
Voltage - 120v
Lumens - 750lm (ELK19) or 950lm (ELK21)
Dimmable - Triac/ELV
Height - 4 5/8"
Length - 11"
When you're working on an existing ceiling, the ELCO E2LK57RICA 2" IC Airtight Remodel Housing from USA Light is your high-performance solution. This 10.5W, 120V housing is specifically engineered for use with ELCO's elite Architectural Koto LED Engine, allowing you to bring high-end, modular lighting into any space.
Its primary use is for retrofit projects where you need a clean, minimalist aesthetic without sacrificing quality. As one of the best recessed lighting housings for this purpose, its IC and Airtight ratings ensure energy efficiency and safety. The smooth Triac/ELV dimming gives you precise control, making it ideal for both modern interior lighting in homes and sophisticated commercial interior lighting in galleries or offices.
This fixture is a go-to for professionals who source from wholesale lighting supply and require reliable lighting and electrical supplies for architectural-grade installations. Order today.
- Single Wall IC Airtight for direct contact with insulation
- Lumen output based on module
- Housing accommodates up to 1 1/2" ceiling thickness
- Maximum hole cutout is 3 5/8"
- 5 year factory warranty (limited)
- UL Listed for Damp Locations and Wet Locations with Select Trims
- UL Listed for Direct Contact with insulation and Combustible materials
- UL Listed for Feed Through, Airtight Per ASTM E-283, Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance.
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
| Lumens | -
| 750LM (ELK19) or 950LM (ELK21)/Lumen Output Based On Module Selection | -
-
-
- Construction Type
-
| -
| IC Airtight Remodel Housing For Architectural Koto LED Engine | -
-
-
| Electrical | -
| High Efficiency Driver with Power Factor >0.9 | -
-
-
- Dimmability
-
| -
| Triac/ELV | -
-
-
- Warranty
-
| -
- 5 Year Limited Factory Warranty
| -
-
-
- Knockouts
-
| -
| Seven (7) 1/2" Trade Size Conduit Knockouts, Four (4) 3/4" Knockouts, Pry-out Knockout Slots, Four (4) Romex Pry-Outs With Strain Relief | -
-
-
- Approval Type
-
| -
| UL - Damp Locations, UL - Wet location (with Select Trims), UL Listed for Feed through, UL Listed For Direct Contact, ASTM E-283 | -
-
-
- Recessed Size
-
| -
| 2" | -
-
-
- Wattage
-
| -
| 10.5 Watts | -
-
-
| Input Voltage | -
- 120V
| -
-
-
| Manufacturer | -
| ELCO Lighting | -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction
▪ IC Airtight Rated for direct contact with insulation, for use in IC and non-IC conditions.
▪ Housing accommodates up to 1 1/2" ceiling thickness. Maximum hole cutout is 3 1/4"
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for ceiling plenums where 2x6 joists or taller are used.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts, Pry-out knockout slots
▪ Four (4) Romex pry-outs with strain relief. See installation sheet for detailed information
Electrical
▪ Input Voltage: 120V, High Efficiency driver with power factor >0.9
Dimmability
▪ Triac/ELV
Compatible Trims
▪ Compatible with - For use with ELCO Architectural Koto LED Light Engines (ELK19 & ELK21 Series Only).
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims.
▪ UL Listed for Feed Through, Airtight per ASTM E-283, Install a JA8 2016-E Lamp/Luminaire for Title 24 Compliance
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
