 |
 |
 |
|
Part Number: E2LRC106
2" Non-IC Airtight Housing-Remodel
Trims: Compatible with - E210C06, E213C06, E214C06, E215C06, E218C06, E219C06 Series
Wattage - 9w
Voltage - 120v
Dimmable - Triac/ELV
Upgrading your space is simple with the ELCO E2LRC106 2" Remodel Recessed Housing from USA Light, designed specifically for existing ceilings.
- This 9W, 120V unit is built for remodel jobs, installing from below without attic access.
- It features smooth Triac/ELV dimming to help you create the best interior lighting ambiance.
- Its airtight design stops airflow, improving your home's energy efficiency.
This housing is your first step toward achieving the best recessed lighting in any room. As a Non-IC unit, you must keep insulation at least 3 inches away. At USA Light, we provide these essential components, as well as options for the best exterior lighting and deals on wholesale light bulbs to complete your entire project.
- Always turn off the power at the breaker before starting your installation.
- Use the provided 2-3/4" cutout template; cutting the hole to the precise size is critical for a snug fit.
- After inserting the housing, push the remodel clips up until they snap firmly against the back of the drywall.
- Height allows for 2x4 construction
- Flexi-joint allows for easy installation and solid support
- Housing adjusts to accommodate up to 1 1/4" ceiling thickness
- Works with 120v Triac and ELV type dimmers
- Aluminum housing for greater heat dissipation.
- Driver included on housing
- LED Light Engine sold separately
- Fireproof with ELCO accessories: Sold Separately!
- U.S. Patent 10,281,131
- 5 year factory warranty (limited)
- UL Listed for Wet Location
- UL Listed for Feed Through
- Meets restricted airflow requirements (per ASTM-283)
 
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
- Material
-
| -
- Aluminum Housing
| -
-
-
- Construction Type
-
| -
| Non-IC Airtight | -
-
-
| Construction | -
| Height Allows for use in 2x4 Construction | -
-
-
- Dimmability
-
| -
- Triac/ELV (120V Only)
| -
-
-
- Warranty
-
| -
- 5 Year Factory Warranty (limited)
-
| -
-
-
- Maximum Hole Cutout
| -
| 2 5/8" | -
-
-
- Approval Type
-
| -
- UL - Wet location, C-UL - Feed-through wiring
| -
-
-
- Recessed Size
-
| -
- 2"
-
| -
-
-
- Wattage
-
| -
9 Watts-
| -
-
-
- Voltage Rating
-
| -
- 120V
| -
-
-
- Dimensions
-
| -
- See Illustrations/See Spec Sheet
-
| -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction
▪ Height allows for 2x4 construction
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
▪ Aluminum housing for greater heat dissipation. Flexi-joint allows for easy installation and solid support
▪ Driver mounted on junction box for cooler LED operation.
Installation
▪ Designed for shallow ceiling plenums where 2x4 joists or taller are used. Maximum hole cutout is 2 5/8"
▪ Suitable for t-grid and drop ceiling applications. See installation sheet for detailed information
Electrical
▪ Driver connects to 120V power supply. High Efficiency driver with a power factor > 0.9.
Dimmability
▪ Works with 120V Triac and ELV type dimmers. Dims down to 10%. For full list of dimmers, refer to Compatible Dimmer List.
Compatible Trims
▪ Compatible with - E210C06, E213C06, E214C06, E215C06, E218C06, E219C06
Listing
▪ UL Listed for Wet Locations
▪ Meets restricted airflow requirements (per ASTM-283)
▪ UL Listed for Feed Through
|
|
|
|
|
|
|
