|
|
|
|
Part Number: E6LC08ICAD2
6" Cedar System New Construction IC Airtight Housing with Driver.
Trims: ELCO Cedar System 6" LED Light Engines. Sold Separately!
Lumens - 850lm Voltage - 120/277v Dimmable - Triac/ELV/0-10V
Height - 7 1/2" Length - 10 1/2" Width - 7 1/2"
- Single Wall IC rated for direct contact with insulation, for use in IC and non-IC conditions. 850 or 1,250 lumens.
- Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
- Trims and inserts sold separately
- Optional For Purchase: 90 minute 120/277 VAC, 60Hz, Emergency Backup, Butterfly Bracket, Fire Resistance: Call our customer service line, 1-877-235-0020, for more info!
- 5 year limited factory warranty
- USA designed and assembled, Flicker Free Dimming
- 2 at the end of item number denotes Generation 2, please note Gen 1 and Gen 2 are not cross compatible
- UL Listed for Damp Locations/Wet Locations with select trims
- UL Listed for Direct Contact with insulation and Combustible materials
- UL Listed for Feed Through
- Meets CA Title 24 requirements
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
Compatibility | -
For Use With ELCO Cedar System 6" LED Light Engines: Sold Separately! | -
-
-
- Construction Type
-
| -
- Airtight-New Construction
| -
-
-
Hanger Bars | -
- Spans Up To 24" And Can Be Repositioned 90°
-
| -
-
-
Fire Rated | -
No/ELCO Fire Resistance Accessories Available For Purchase | -
-
-
- Warranty
-
| -
- 5 Year Limited Factory Warranty
| -
-
-
- Knockouts
-
| -
Seven (7) 1/2" Trade Size Conduit Knockouts, Two (2) 3/4" Knockouts, One (1) 3/8" Knockout, Four (4) Pry-Out Knockouts Slots | -
-
-
- Approval Type
-
| -
UL - Damp Locations, UL - Wet location (with Select Trims), UL Listed - Feed Through wiring, Meets CA Title 24 Requirements, UL Listed For Direct Contact With Insulation | -
-
-
- Recessed Size
-
| -
6"-
| -
-
-
Lumens | -
850LM | -
-
-
- Voltage Rating
-
| -
120/277 Volts | -
-
-
- Dimmable
| -
Triac/ELV/0-10V | -
-
-
-
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
Construction/Installation ▪ Single Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions. 850 or 1,250 lumens. ▪ Housing accommodates up to 1 1/2" ceiling thickness. Suitable for T-grid and drop ceiling applications. ▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. ▪ Designed for ceiling plenums where 2x8 joists or taller are used. High strength hanger bars can easily nailed to joists.
Junction Box ▪ Positioned to accommodate straight conduit runs. ▪ Seven (7) 1/2" trade size conduit knockouts, Two (2) 3/4" knockouts, One (1) 3/8" knockout. ▪ Four (4) Pry-outs knockouts slots for easy Romex installation. See installation sheet for detailed information
Hanger Bars / New Construction ▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. ▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Emergency Battery Backup ▪ Optional: Up To 90 Minutes of Emergency Power Battery Backup with test indicator switch (double wall housings requires access from above): Sold Separately!
Electrical/Dimming ▪ Driver is rated for 120V and 277V input(120/277V). 3 in 1 dimming: Triac, ELV, and 0-10V dimming in one driver. 0-10V dimming down to 5% with compatible dimmer. Can be specified with Lutron drivers for 0.1% and 1% dimming. Flicker free dimming.
Compatible Trims ▪ Compatible with - For use with ELCO Cedar System 6" LED Light Engines.
Listing ▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through ▪ Meets CA Title 24 Requirements ▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|