Home > Recessed Lighting >

ELCO EL1499ICA - 4" Low Voltage Airtight IC Housing - 50W Max. - 120V - Magnetic Transformer - LED/MR16 GU/GX5.3 Bi-Pin - Silver/Black


Alternative Views:

Download The Spec Sheet

Price: $55.02

Stock Status: In Stock


Description Technical Specs Shipping Time
Part Number: EL1499ICA

4" New Construction Housing with Magnetic Transformer. Uses a GU5.3 Bi-Pin socket for use with Bi-Pin GU5.3 MR16 Lamps. ELCO Alpine System Housings.

Compatible With: ELCO 4" MR16 Trims. Sold Separately!

Wattage - 20-50w
Input Voltage - 120v
Output Voltage - 12V
Bulb Type - LED/MR16 GU/GX5.3 bi-pin (Not Included)
Magnetic Transformer
Dimming - MLV Type

Height - 7 1/4"
Length - 12 1/2"
Width - 8 1/2"

  • Double Wall IC Rated, for use in insulated ceilings, in IC and Non-IC conditions
  • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
  • Use only dimmers specifically designed for magnetic transformers
  • Lamp may affect dimmability
  • Low voltage luminaires may produce audible sound when used with dimmers
  • Lamp Holder: MR16 GU/GX5.3 Bi-Pin Socket
  • Trims and inserts sold separately
  • 3 year factory warranty (limited)
  • UL Listed for Damp Locations/Wet Locations with select trims
  • UL Listed for Direct Contact with insulation and Combustible materials
  • UL Listed for Feed Through
  • Airtight per ASTM E-283
  • CA Title 24 JA8 Compliant


  • Construction/Installation
    ▪ Double Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions.
    ▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Suitable for T-grid and drop ceiling applications.
    ▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
    ▪ Designed for ceiling plenums where 2x6 joists or taller are used. Steel housing for greater heat dissipation. Stamped Galvanized steel frame.

    Junction Box
    ▪ Positioned to accommodate straight conduit runs.
    ▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts with pry-out knockout slots.
    ▪ Four (4) Romex pry-outs with strain relief. See installation sheet for detailed information

    Hanger Bars / New Construction
    ▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Maximum hole cut-out is 4 1/4".
    ▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.

    ▪ Input Voltage: 120VAC. Output Voltage: 12V AC. Max Wattage: 50W. Thermally protected against improper lamping.

    ▪ Based on lamp selection. Magnetic Transformer dims with MLV type dimmers. Lamp may affect dimmability.

    Compatible Trims
    ▪ Compatible with - ELCO 4" MR16 Trims and designed for use with 12V MR16 20-50W Max GU/GX5.3 MR16 LED Bulbs: Sold Separately!

    ▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
    ▪ Airtight per ASTM E-283. CA Title 24 JA8 Compliant
    ▪ UL Listed for Direct Contact with Insulation and Combustible Materials.

Share your knowledge of this product. Be the first to write a review »