 |
 |
 |
 |
|
 |
|
Features
Construction/Installation
▪ 3" Low Voltage Shallow Housing. Versatile, reliable, and easy to install. Non-IC Housing/Electronic Transformer
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Maximum Hole cutout is 3 3/4". Integral thermal protector guards against improper lamping.
▪ Designed for ceiling plenums where 2x6 joists or taller are used. Aluminum Housing for greater heat dissipation. Stamped Galvanized steel frame.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size pry-out conduit knockouts, Four (4) Romex pry-outs with strain relief.
▪ Junction Box is listed for 90° supply wire. See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Maximum Hole cutout is 3 3/4".
▪ Integral T-bar slots for easy installation in T-grids. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Input Voltage: 120V AC. Output Voltage: 12V AC. 50W Max: Electronic Transformer. Integral thermal protector guards against improper lamping.
Dimmability
▪ Electronic Transformer dims with ELV type dimmers. Lamp choice may affect dimmability.
Compatible Trims
▪ Compatible with - ELCO Low Voltage MR16 Trims: Sold Separately! Designed for use with GU5.3 MR16 lamps up to 50W.
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
▪ Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance
▪ 3 year limited factory warranty.
|
|
|
|
|
|
|
