 |
 |
 |
 |
|
 |
|
Features
Construction
▪ IC Rated for direct contact with insulation, for use in IC and non-IC conditions. Steel Housing for greater heat dissipation.
▪ Housing accommodates up to 5/8" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. Stamped galvanized steel frame
▪ Designed for ceiling plenums where 2x6 joists or taller are used. High strength swivel hanger bars can easily be nailed to joists.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts with pry-out knockout slots.
▪ Four (4) Romex pry-outs with strain relief. See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed swivel hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Input Voltage: 120/277V.
Dimmability
▪ Based on lamp selection.
Compatible Trims
▪ Compatible with - Designed for use with ELCO 2" PEX Twist-On Trims and 0-10V Koto LED Modules
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
▪ cULus Listed for US and Canada. Airtight per ASTM E-283
▪ UL Listed for Direct Contact with Insulation and Combustible Materials. Install a JA8-2016-E lamp for CA Title 24 Compliance.
|
|
|
|
|
|
|
