 |
 |
 |
 |
|
 |
|
Features
Bulb Type: Designed for use with Medium Base (E26) Incandescent, CFL or LED
Housing
▪ Single wall IC rated for direct contact with insulation. Designed for use in 2/12 to 6/12 sloped ceiling.
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. High Strength hanger bars can be easily nailed to joists.
▪ Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts.
▪ 4 (4) pry-out knockout slots for easy romex installation.
Hanger Bars / New Construction
▪ Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars
▪ Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists
Installation
▪ Designed for ceiling plenums where 2" x 8" joists or taller are used. Template for hole cut-out is provided with each housing. Suitable for T-grid and drop ceiling applications. (see installation sheet for detailed information)
Electrical
▪ Rated for 120V or 277V input. For 277v step down to 120V housing consult our customer service line.
Listing
▪ UL Listed for Direct Contact with Insulation and Combustible Materials
▪ UL Listed for Feed Through
▪ UL listed for Damp Locations, Air Tight per ASTM E-283
|
|
|
|
|
|
|
