Home > Recessed Lighting > Six Inch Recessed Lighting >

ELCO EL770ICA - 6" LED Air Tight IC Line Voltage Recessed Housing - New Construction


ELCO EL770ICA
CUSTOMER REVIEWS

 
Alternative Views:



Download The Spec Sheet

Price: $14.19
Everyday lowest price regardless of quantity!

Stock Status: In Stock

Qty:

Description Technical Specs Shipping Time
 
Part Number: US-106ICAT-LED
Part Number Description: EL770ICA


Compatible with ELCO 6" LED Inserts.

Bulb Type: LED Modules, LED Inserts, or PSA37 with 6" MR16 Trims

Housing
▪ Steel housing for greater heat dissipation. Stamped galvanized steel frame
▪ Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness; Airtight housing with gasket to restrict airflow in accordance with ASTM-283 air-tight requirements

Junction Box
▪ Positioned to accommodate straight conduit runs
▪ Contains seven 1/2" trade size conduit knockouts and four Romex pry-outs with strain relief.
▪ Four 3/4" knockouts. Pry-out knockout slots

Hanger Bars / New Construction
▪ Pre-installed hanger bars with TrueNail Facilitate easy installation in regular lumber, engineered lumber, and laminated beams
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction.

Installation / New Construction
▪ Integral leveling flange allows for single-person installation while aligning the housings with the joists; Maximum hole cutout is 6 1/4". Suitable for T-grid and drop ceiling applications

Electrical
▪ Input Voltage: 120VAC; Inherently protected

Dimmability/Compatibility
▪ Dimmability based on lamp; Designed for use with ELCO 6" LED Inserts, LED Modules, or PSA37 with 6" MR16 trims: Trims and Inserts Sold Separately!

Listing
▪ UL Listed for Damp location, UL Listed for Wet Location with select trims, UL Listed for Feed Through
▪ Install a JA8-2016-E lamp for California Title 24 Compliance
▪ UL Listed for Direct Contact with Insulation and Combustible Materials, Airtight per ASTM E-283



Related Items
ELCO FIRECVR - 17" Wide Recessed Fixture Fire Cover ELCO FIREENCL-S - Shallow Flexible MICA Fire Enclosure ELCO FIREENCL - Flexible MICA Fire Enclosure ELCO KEM-LD5 - 90 Minute Emergency Battery Backup
Price: $130.65

Add
Price: $50.99

Add
Price: $55.05

Add
Price: $223.50

Add
ELCO FIRECVR ELCO FIREENCL-S ELCO FIREENCL ELCO KEM-LD5
ELCO FIRETAPE - Mica Adhesive Fire Tape
Price: $23.55

Add
ELCO FIRETAPE

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Partly installed . . . July 2, 2018
Reviewer: Brad Rowland from Hesperia, CA United States  
I'm building a new house with 83 of these in the design. I put the first 21 up this morning. No problem, very easy. Very good quality. I'm a happy camper.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 10, 2017
Reviewer: Joe Manela from Wyckoff, NJ United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Product October 20, 2015
Reviewer: Jeremy from Bloomington, IN United States  
Easiest can lights I've ever installed, excellent quality product.  Order was accurate and shipped quickly.  Absolutely no complaints.

Was this review helpful to you?