Home > Recessed Lighting >

ELCO EL7ICA-G24 - 6" Airtight IC Housing with GU24 Base Socket - 27W Max. - 120V - LED Retrofit or Self Ballasted CFL - Socket Bracket - Silver


ELCO EL7ICA-G24
CUSTOMER REVIEWS

 
Alternative Views:



Download The Spec Sheet

Price: $14.95
Everyday lowest price regardless of quantity!

Stock Status: In Stock

Qty:

Description Technical Specs Shipping Time
 
Part Number: EL7ICA-G24

6" Airtight IC Housing. Designed for use with 27W Max. Self Ballasted CFL, GU24 Base. Compatible with ELCO 6" Line Voltage PAR Trims.


Wattage - 27w Max.
Voltage - 120v
Bulb Type - 27W Max. Self Ballasted CFL, GU24 Base
Bulbs and Trims Sold Separately!

Height - 7"
Width - 7"
Length - 9 1/2"


  • 6" Airtight IC Housing for insulated ceilings and with Adjustable Socket Bracket
  • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
  • IC Airtight for direct contact with insulation, for use in IC and non-IC applications
  • For use with LED Retrofit or 27W Max self ballasted 120V CFL Lamp (GU24 base)
  • Compatible with ELCO 6" Line Voltage PAR trims
  • 3 year limited factory warranty
  • UL Listed for Feed Through
  • UL listed for Direct Contact with insulation and Combustible Material
  • UL Listed for Damp
  • Airtight per ASTM E-283
  • Install a JA8-2016-E Lamp/Luminaire for Tile 24 Compliance


Features

  • Bulb Type: For use with LED Retrofit or 27W Max. Self Ballasted 120V CFL Lamp (GU24 Base)!

    Housing
    ▪ IC Rated for direct contact with insulation, for use in IC and Non-IC conditions. Integral T-Bar slots for easy installation in T-grids.
    ▪ Housing adjusts in frame to accommodate 1 1/4" ceiling thickness, Aluminum housing for greater heat dissipation. Stamped Galvanized steel frame.
    ▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. Maximum Hole Cut-out is 6 3/8".

    Junction Box
    ▪ Positioned to accommodate straight conduit runs.
    ▪ Seven (7) 1/2" trade size pry-out conduit knockouts.
    ▪ Four (4) Romex pry-outs with strain relief.

    Hanger Bars / New Construction
    ▪ Pre-installed hanger bars with True Nail facilitates easy installation in regular lumber, engineered lumber, and laminated beams.
    ▪ Spans up to 24° and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with the joists.

    Installation
    ▪ Designed for ceiling plenums where 2x8 joists or taller are used. High strength hanger bars can be easily nailed to joists. Suitable for T-grid and drop ceiling applications.

    Electrical
    ▪ Input Voltage: 120V AC. Thermally protected against improper lamping.

    Trims/Lamp
    ▪ Compatible with ELCO 6" Line Voltage PAR Trims. Designed for use with 27W Max. Self Ballasted CFL, GU24 base.

    Listing
    ▪ UL Listed for Damp Location. UL Listed for Feed Through.
    ▪ Airtight per ASTM E-283. Install a JA8 2016-E lamp/luminaire for Title 24 compliance.
    ▪ UL Listed for Direct Contact with Insulation and Combustible material.

Share your knowledge of this product. Be the first to write a review »