 |
 |
 |
|
Part Number: ELST83BZ
ELCO's Trogon Collection consists of diecast wet location LED Brick Lights which are offered in 5.4W or 12W, 3000K, 120V with an Angled Louver, Open Frame Lens, or Grill Faceplate in a sharp White, Black, or Bronze powder coated finish.
Wattage - 5.4w
Voltage - 120v
Color Temp - 3000K
Lumens - 340lm
CRI - 90+
Avg. Rated Life (L70) - 35,000hrs
Finish - Bronze
Height - 3 5/8"
Width - 9 3/4"
Depth - 3 3/4"
Providing an expansive, uninterrupted wash of warm light across rich masonry surfaces requires an architectural fixture with an unobstructed aperture. The ELCO ELST83BZ - LED Brick Light with Open Faceplate - 5.4W - 3000K - 120V - Frosted Lens - Bronze delivers optimal light scattering housed in a rugged, earth-toned frame. Ordering through USA Light simplifies your material procurement with direct access to specification-grade hardware built for longevity.
Tips to install these models successfully include roughing in the housing boxes perfectly level before pouring concrete or laying stone to ensure a flush finish. Caulking the outer perimeter of the bronze faceplate with a clear, outdoor-rated silicone prevents moisture intrusion behind the brick lights while keeping the look clean. Utilizing a top-tier wholesale lighting supply guarantees you have the exact conduit accessories needed for a seamless line-voltage connection. Incorporating these wide-dispersion units into commercial exterior lighting layouts or custom residential outdoor landscape lighting blueprints guarantees high-performance safety. Selecting the best exterior lighting ensures long-term structural harmony and flawless nighttime visibility. Order today. - Diecast aluminum housing and faceplate with smooth powder coat finish.
- Integrated LED board and driver. Diffused glass lens behind faceplate.
- Housing equipped with (2) side brackets and (2) 1/2" knockouts for easy wiring.
- cUL and cULus Listed for Wet Location for indoor or outdoor use, Listed for poured concrete, IC Rated for Direct Contact with Insulation
 
| Tech Specs |
|---|
|
| | | Voltage Rating | 120V | | Item Type | Step Light - Brick Lights | | Wattage | 5.4 Watts | | Finish | Bronze | | Lumens | 340LM | | Color Temperature | 3000K | | Special Information | Integrated LED Board and Driver | | Rated | Wet Location Listed, Suitable For Poured Concrete and Other Wall and Brick Installation Types, IC Rated For Direct Contact with Insulation | | CRI | 90+ | | Lens | Frosted Glass | | Manufacturer | ELCO Lighting | | Operating Temperature | -23° F (-5°C) to 113° F (45°C)
| | Material | Diecast Faceplate/Smooth Powder Coat Finish |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Optics: Open Face with frosted glass lens to diffuse light and illuminate walkway.
Construction: Diecast faceplate with smooth powder coat finish. LED board and driver integrated into housing. Tamper-proof screws for mounting faceplate to box. Heavy duty aluminum housing.
Installation: Suitable for poured concrete and other wall and brick installation types. Housing equipped with two side brackets.
Electrical: Housing with 1/2" conduit knockout on each side suitable for thru-wiring. Ambient operating temperature -23°F (-5°C) to 113°F (45°C). Driver input of 120V 50/60Hz connects directly line voltage power.
LED Technology: 90+ CRI for extremely accurate color rendering. Lumen maintenance of 35,000 hours L70 life. LED Array.
Listings: cUL and cULus Listed for Wet Location. Listed for Poured Concrete. IC Rated for direct contact with insulation.
|
|
|
|
|
|
|
