Home > Yes >

ELCO ERT475CT5DH - 4" LED High Lumen Round Insert - 5-Lumen Switch - 5-CCT Switch - All Haze/Reflector

CUSTOMER REVIEWS

Download The Spec Sheet

Price: $55.05

Stock Status: In Stock

Qty:

Description

Technical Specs

Shipping Time

Part Number: ERT475CT5DH

4" LED High Lumen Round Reflector Insert with 50CCT Switch & 5-Lumen Switch.

The 4" ELCO LED High Lumen Round Reflector Insert recessed downlight is designed for quick installation without a housing for both new construction and remodel applications, gives you the options you are looking for in one fixture. The CCT manual switch allows you to choose between 2700K, 3000K, 3500K, 4000K, or 5000K. The Lumen Switch allows you to choose between 1000lm (12W), 1250lm (15W), 1500lm (18W), 1800lm (22W), or 2000lm (25W). IC-rated for use with direct contact with insulation.

0-10V/Triac/ELV Dimmable

Wattage - 12, 15, 18, 22, 25 Watts
Voltage - 120/277v
Lumens - 1000, 1250, 1500, 1800, 2000lm
Selectable CCT - 27/30/35/40/50K
Beam Angle - 80° Standard
Finish - All Haze

Isolated driver integrated inside aluminum remote box with two knockouts with slots for pry-out
Designed to fit in plenums as shallow as 3"
Polycarbonate lens diffuses light evenly throughout space with no LED pixelation
Driver connects directly to 120-277V power supply
New construction application requires mounting plate or frame
Remodel applications require no additional accessories
Eliminates the need for housing
IC rated driver and fixture are tested and approved for direct contact with insulation
Optional 90 minute emergency battery backup (KEM-ERT sold separately)
5 year factory warranty (limited)
ETL Listed for Wet Locations
IC Airtight Rated for direct contact with insulation
CA JA8 Title 24 Compliant

Features

The ELCO 4" LED High Lumen Round Reflector Insert with 5-cct Switch & 5-Lumen Switch
LED Driver
- IC rated driver and fixture are tested and approved for direct contact with insulation
- Isolated driver integrated inside aluminum remote box with two knockouts with slots for pry-out
- 5 year factory warranty (limited)
- Driver connects to 120-277V power supply. High efficiency driver with a power factor > 0.9. Start time of less than .75 seconds
Features
- Polycarbonate lens diffuses light evenly throughout space with no LED pixelation
- Maximum hole size should not exceed 4 1/4" for this product. Suitable installation for T-grid and drop ceiling applications
- Plenum rated cable connector to connect from module to remote driver box
- Designed for super shallow ceiling plenums without any housing
- High strength steel spring clip for easy installation. Hole cut out template provided for proper trim installation
- Works with 120V Triac/ELV type dimmers or 120/277V with 0-10V dimmability on 120/277V and Triac/ELV on 120V side. Dims down to 10%
- For full list of dimmers, refer to ELCO ELM System Dimmer Compatibility List
Listings
- IC Rated for direct contact with insulation
- ENERGY STAR Certified
- Meets state of CA Title 24 requirements
- ETL Listed for Wet locations
Specifications
- Selectable Watts
- Selectable Lumens
- 90+ CRI