LED Exit/Emergency Light Combination with Battery Back-Up

BODY

• The thermoplastic housing of the product makes it corrosion-proof and scratch-and impactresistant.

• UV-stabilization prevents discoloration of the product.

• Every fixture includes a canopy, extra faceplate, and replaceable chevron directional indicator

knockouts for control of direction.

• Double compartment shaped by injection.

FACE: EXIT

• Single or dual configuration. Solid face included if single face appearance is preferred

• 6" high text with color diffusion

• Knockout directional chevrons

FACE: EMERGENCY

• Beveled face with (2) MR16 lamp heads

MOUNTING

• Unique "snap-together" universal mounting design permits top, back and side mounting.

Necessary hardware and canopy are provided electrical

ELECTRICAL

• 120V or 277V Dual Input

• Normally uses 3.8 watts of power, 14 watts in emergency use

LIGHT SOURCE

• Exit: LED strips in times of normal functioning

• Emergency: (2) 2W MR16 lamps with matching covers

BATTERY

• 6V 4.5 amp, sealed-lead acid battery

• Minimum 120 minutes of illumination

• Solid-state internal circuitry for charging

TESTING

• Test Button

• Indicator light shows high charge and readiness for operation

SAFEGUARDS OF CIRCUITRY

• Protected against short circuits and brown-outs

• Full discharge requires disconnection

LISTED

• ETL listed for through-branch circuit wiring, damp locations. Wet location only if used with lens

trims.

• Damp location approve