 |
Part Number: LED-ALIN2-6FT-3P75-UD-5CCT-WH
ITEM NOT QUALIFIED FOR FREE SHIPPING!
0-10V/Dimmable (Dim-To-Off/Flicker Free)
Selectable Wattage - 50/62.5/75w
Voltage - 120-277v
Lumens - 6,000/7,500/9,000lm
Selectable CCT - 27/30/35/40/50K
Beam Angle - 110°
80° Downlight/20° Uplight
Projected Life (L70) - 50,000 Hours
Finish - White
Length - 6' (ft)
Width - 2"
Height - 4"
Mastering the balance between ambient and task illumination is a professional reality with the EnVisionLED LED-ALIN2-6FT-3P75-UD-5CCT-WH - ARCY-LINE: 6' Architectural Linear Fixture (Downlight/Uplight) from USA Light. This 6-foot powerhouse offers a bi-directional distribution that transforms standard indoor office lighting into a dynamic, multi-dimensional environment. While low-voltage interior lighting provides localized accents, this high-wattage linear fixture serves as a primary source of light, delivering up to 75W of power across expansive ceiling planes.
For those seeking the most versatile indoor LED lights, the uses for contractors are extensive. You can deploy these fixtures in open-concept corporate lobbies to provide soft ceiling "wash" alongside direct desk illumination, or install them in modern healthcare facilities where adjustable 5-CCT color temperatures are vital for occupant comfort. USA Light ensures this model provides maximum utility in commercial lighting for contractors, allowing for rapid customization of wattage and color temperature on-site to meet the exacting demands of any high-profile architectural project. Order today.
- Made To Order - Lead Times Vary! Call our customer service line for more information: 1-877-235-0020
- The EnVisionLED ARCY-Line Direct/Indirect Architectural luminaires offer a 2" sleek and modern appearance with symmetrical light distribution. They can be surface, wall, recess, trim-less, or pendant mounted.
- Lens: Acrylic Frosted Lens Standard: efficiently emits the light through a high-quality acrylic lens, spreading it evenly and without causing glare - Optional Louver available (added fee's may apply)
- One piece aluminum extrusion housing that incorporates a precisely cut, smooth white extruded frosted lens that securely attaches to the body and allows easy removal for accessing the driver and LED board when needed.
- Solid aluminum end caps are included, Finished with corrosion free powder coat, 4O J-Box cover included with every fixture
- Fixture is pre-wired for daisy chain, No additional wiring is required for continuous run, Connector Brackets to link fixtures in a continuous run is included, 5-wire 6' power cord is included, 6' canopy suspension kit (One (1) power feed) included, Surface Mount: compatible with 3O or 4O J-Box, screws and connector included with each fixture
- Optional For Purchase: Wall, Recessed, Trim-Less, L-Shape, X-Shape, T-Shape, Flange Mount, Suspended all available: See Accessories Below
- ETL Listed, DLC Premium Listed, Approved For CA T24, FCC CFR 47, GCC Part 15, Subpart B:2017, IP Rating: Damp Location (IP44)
- 5 year limited factory warranty
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
- Voltage Rating/Type
| -
- 120-277V
| -
-
-
| Finish | -
| White | -
-
-
| Selectable Wattages | -
| 50 Watts/62.5 Watts/75 Watts | -
-
-
- Dimmable
| -
| YES/0-10V/Dim-To-OFF/Flicker Free | -
-
-
- Lumens
-
| -
| 6,000LM/7,500LM/9,000LM | -
-
-
| Selectable CCT | -
| 2700K/3000K/3500K/4000K/5000K | -
-
-
- CRI
-
| -
| >90 | -
-
-
- Projected Life (L70)
| -
50,000 Hours-
| -
-
-
| Thermal | -
- -4°F to 122°F
| -
-
-
- Lens
| -
| Frosted Acrylic | -
-
-
-
|
|
|
|
