 |
 |
 |
 |
|
 |
|
Features
- • Thermally Protected IC housing.
- • Designed for accent and task lighting applications.
- • Wire through junction box.
- • Preinstalled adjustable bar hanger.
- • Dependable, favorable design and effortless installation.
- • 5-½" height allows use in 2" x 6" joist construction.
- • Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
-
-
- DESCRIPTION:
-
-
-
-
-
- Small aperture line voltage, thermally protected, specification grade recessed housing. For new construction. Non-insulated ceilings or where insulation can be kept 3" from the housing. Accommodates up to 50W GU10 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four ½" KOs, one ¾" KO and four Romex knockouts with strain relief.
-
- SPECIFICATION:
-
- A. HOUSING - High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate ½" to 1-3/8" ceiling. Accommodates lamps up to 50W depending on trim used.
B. SOCKET- GU10 floating socket allows for lamp to snap into trim and provide secure lamp retention.
C. BAR HANGERS - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact, and the 90° pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots
D. JUNCTION BOX - ETL listed for through-branch circuit wiring and has four ½" KOs,one ¾" KO and four Romex knockouts with true pry-out slots and strain clamps. -
|
|
|
|
|
|
|
