 |
Features
- • Thermally Protected IC housing.
- • Designed for accent and task lighting applications.
- • Wire through junction box.
- • Preinstalled adjustable bar hanger.
- • Dependable, favorable design and effortless installation.
- • 7-1/4” height allows use in 2”x 8” joist construction.
- • Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
-
-
- DESCRIPTION:
-
-
-
-
-
- Small aperture, line voltage, thermally protected IC rated, specification grade recessed housing designed for new construction. Accommodates up to 50W GU10 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four ½" KOs, one ¾" KO and four Romex knockouts with strain relief.
-
-
- SPECIFICATION:
-
- A. OUTER HOUSING - Die-formed aluminum construction for maximum heat dissipating air chamber on top of the housing. Junction box could be accessed from inside and outside housing.
B. INNER HOUSING - Deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate ½" to 1-3/8" ceiling.
C. SOCKET- GU10 floating socket allows for lamp to snap into trim and provide secure lamp retention.
D. BAR HANGERS - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
E. JUNCTION BOX - ETL and UL listed for through-branch circuit wiring and has four ½" KOs, one ¾" KO and four Romex knockouts with true pry-out slots and strain clamps. -
|
|
|
IC housing 
