| ETL | Yes |
| Footnotes 1 | This luminaire is intended for use on Class 2 circuits only. Use only on low voltage circuits with output ranges identified in specifications. This luminaire may be dimmed using analog dimmers and magnetic transformers. May not be compatible with all dimmers and/or transformers and should be tested in application for compatibility prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors or occupancy sensors. |
| Footnotes 2 | Dimmable for 120V only. Luminaire is rated for 120-277V circuits. |
| Footnotes 3 | Caution: Risk of electric shock. Never disassemble or modify the LEDs, no user serviceable parts inside. To avoid burns, do not touch the LEDs during operation and allow to cool completely after switching off. This luminaire is not intended for use in emergency exit fixtures. This luminaire complies with Part 18 of the FCC rules. This product may cause interference with other devices, if interference occurs, change the location of the products involved. |
| Footnotes 4 | Do not use where directly exposed to water. |
| Footnotes 5 | Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans. |
| Footnotes 6 | Dimmable down to 10%, but are limited by the dimming device range. |
| Footnotes 7 | Luminaire is ETL approved for damp locations. |
| Footnotes 8 | Rated for indoor use only. |
| Maximum Ambient Temperature (C) | 45C (114F) |
| Mercury | No |
| Mercury Content (Hg) | 0 |
| Minimum Starting Temperature (C) | -25C (-13F) |
| Power Factor | 0.98 |
| Prod Code | CDL6FR15/940/RTJB/LED |
| Reflector material | Polycarbonate Lens |
| RoHS Compliant | Yes |
| SS BUY PKG | 12 |
| UL | No |
| UNSPSC | 39112102 |
| UPC Code | 807154996162 |
| Warning 1 | Use only on 120-277 volts, 60-hertz frequency circuits. |
| Warning 10 | Dimmable down to 10%, but are limited by the dimming device range. |
| Warning 2 | Risk of electric shock |
| Warning 3 | Do not use where directly exposed to water |
| Warning 4 | Never disassemble or modify the LEDs. |
| Warning 5 | To avoid burns, do not touch the LEDs during operation and allow to cool completely after switching off. |
| Warning 6 | This luminaire is not intended for use with emergency exit fixtures. |
| Warning 7 | This product may cause interference with other devices, if interference occurs, change the location of the products involved. |
| Warning 8 | This luminaire may not be compatible with all dimmers, timing devices, occupancy sensors, and photo sensors, please check the website www.halcolighting.com/ProLEDdim for up-to-date dimmer compatibility information. |
| Warning 9 | Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans |
| Weight (lbs) | 1.5 lbs. |
| cETL | Yes |
