| Base Material | Aluminum |
| Footnotes 1 | UL approved for wet location in base-up position only. All other base positions must be in a dry environment or in a weatherproof fixture. |
| Footnotes 2 | Not intended for use with emergency exit fixtures, dimmers, timing devices, photo sensors or occupancy sensors. |
| Footnotes 3 | Do not use in totally enclosed fixtures or insulated contact air tight (ICAT) rated fixtures. |
| IP Rating | 50 |
| Maximum Case Temperature (F) | 167 |
| Mercury | Yes |
| Mercury Content (Hg) | 1.6 |
| Minimum Starting Temperature (F) | -4 |
| RoHS Compliant | Yes |
| TCLP Compliant | Yes |
| UL | Yes |
| UNSPSC | 39101619 |
| UPC Code | 807154460038 |
| Warning 1 | Use only on 120 volts, 60-hertz frequency. |
| Warning 2 | Risk of electric shock |
| Warning 3 | UL approved for wet location in base-up position only. |
| Warning 4 | All other base positions must be in a dry environment or in a weatherproof fixture |
| Warning 5 | Never disassemble or modify the bulb |
| Warning 6 | To avoid burns, do not touch the bulb during operation or immediately after switching off |
| Warning 7 | WarCF12 |
| Warning 8 | This device is not intended for use with emergency exit fixtures, dimmers, timing devices, photo sensors, or occupancy sensors |
| Weight (lbs) | 0.824 |
| cUL | Yes |
bulb order and pricing 
