 |
Part Number: RL12-75A
All models of Hatch low-voltage transformers utilize a soft start circuitry to maximize
lamp life. The soft start circuit ramps up the lamp filament voltage slowly when the
lamp is cold.
All Hatch low-voltage transformers employ our (ESP) Electronic Short Circuit and
over load Protection. The ESP sensing circuit will instantly shut down the output
before any of the components are stressed if a short circuit or over load is detected.
The transformer will automatically reset as soon as the fault is corrected.
-High Reliability
-Moisture Resistant
-Emits No Audible Noise
-Lower Harmonic Distortion
-High Power Factor
-Lightweight, Compact Design
-Small Case Size
Wattage - 75w
Input Voltage - 120v 50/60Hz
Output Voltage - 11.5v
Length : 2.08"
Height : 0.79"
Width : 1.30"
IMPORTANT NOTE: Low voltage electronic transformers must be tested under load with a analog meter to achieve accurate results. Testing the transformer with a digital meter will produce an invalid reading of "no output". This characteristic is unique to electronic transformers that produce a square sign wave. We recommend use of an analog meter for testing with the transformer loaded to at least 20% of its rated output. Most electronic transformers returned as defective are actually good due to testing methods in the field that did not follow the above requirements.
- Item Type : Transformer
- Manufacturer: Hatch
- Input: 120v 50/60Hz.
- Output at max load: 11.5VAC
- Weight: 2.4 oz.
- Power Factor: >0.98
- Operating Frequency: 25KHz
- Total Harmonic Distortion: <20%
- Transformer Type : Electronic
- Approval Type : UL
- Length : 2.08"
- Height : 0.79"
- Width : 1.30"
|
|
|
Easy and accurate 
