Home > Transformers >

Hatch RS Series 105W Low Voltage Electronic Transformer 277V


RS12-105-277
CUSTOMER REVIEWS

 
Alternative Views:



Download The Spec Sheet

Price: $34.50

Stock Status:OUT OF STOCK - CALL CUSTOMER SERVICE FOR RESTOCK DATE

Qty:

Description Technical Specs Shipping Time
 
Part Number: RS12-105-277

All models of Hatch low-voltage transformers utilize a soft start circuitry to maximize lamp life. The soft start circuit ramps up the lamp filament voltage slowly when the lamp is cold.

All Hatch low-voltage transformers employ our (ESP) Electronic Short Circuit and over load Protection. The ESP sensing circuit will instantly shut down the output before any of the components are stressed if a short circuit or over load is detected. The transformer will automatically reset as soon as the fault is corrected. NOTE: High temperature 3M double sided tape available for use with side lead models only for mounting transformer to enclosure.

-High Reliability
-Moisture Resistant
-Emits No Audible Noise
-Lower Harmonic Distortion
-High Power Factor
-Lightweight, Compact Design
-Small Case Size

Wattage - 108w
Input Voltage - 277v 50/60Hz
Output Voltage - 11.5v

Length : 3.03" (76.99mm)
Height : 0.81" (20.57mm)
Width : 1.30" (33.02mm)

IMPORTANT NOTE: Low voltage electronic transformers must be tested under load with a analog meter to achieve accurate results. Testing the transformer with a digital meter will produce an invalid reading of "no output". This characteristic is unique to electronic transformers that produce a square sign wave. We recommend use of an analog meter for testing with the transformer loaded to at least 20% of its rated output. Most electronic transformers returned as defective are actually good due to testing methods in the field that did not follow the above requirements.

Share your knowledge of this product. Be the first to write a review »