 |
 |
 |
|
Part Number: ELST81B
ELCO's Trogon Collection consists of diecast wet location LED Brick Lights which are offered in 5.4W or 12W, 3000K, 120V with an Angled Louver, Open Frame Lens, or Grill Faceplate in a sharp White, Black, or Bronze powder coated finish.
Wattage - 5.4w
Voltage - 120v
Color Temp - 3000K
Lumens - 340lm
CRI - 90+
Avg. Rated Life (L70) - 35,000hrs
Finish - Black
Height - 3 5/8"
Width - 9 3/4"
Depth - 3 3/4"
Concealing architectural fixtures within dark masonry or midnight-inspired landscapes requires a deep, matte finish that disappears during the daytime. The ELCO ELST81B - LED Brick Light with Angled Louver - 5.4W - 3000K - 120V - Glass Lens - Black gives you an elite styling choice for heavily trafficked pedestrian areas. Securing these units directly from USA Light guarantees you obtain high-performance, contractor-approved equipment built for years of dependable operation.
Choosing this sleek black finish provides immense advantages, as it effortlessly masks dirt, resists showing outdoor scuffs, and pairs perfectly with charcoal brick, dark stone, or modern ironwork. These louvered brick lights direct their warm 3000K glow downward, eliminating glare while accentuating texture. Sourcing your materials from a premier wholesale lighting supply ensures uniform color consistency across expansive commercial exterior lighting footprints. Integrating this specific model into a comprehensive outdoor landscape lighting blueprint maximizes nighttime safety. Selecting the best exterior lighting creates a polished, cohesive aesthetic while upgrading architectural security. Order today.
- Diecast faceplate with smooth powder coat finish.
- Louver face directs light downward to illuminate walkway with frosted glass lens to diffuse light.
- Integrated LED board and driver. Diffused glass lens behind louver.
- Housing equipped with (2) side brackets and (2) 1/2" knockouts for easy wiring.
- cUL and cULus Listed for Wet Location for indoor or outdoor use, Listed for poured concrete, IC Rated for Direct Contact with Insulation
 
| Tech Specs |
|---|
|
| | | Voltage Rating | 120V | | Item Type | Step Light - Brick Lights | | Wattage | 5.4 Watts | | Finish | Black | | Lumens | 340LM | | Color Temperature | 3000K | | Special Information | Integrated LED Board and Driver | | Rated | Wet Location Listed, Suitable For Poured Concrete and Other Wall and Brick Installation Types, IC Rated For Direct Contact with Insulation | | CRI | 90+ | | Lens | Diffused Glass | | Manufacturer | ELCO Lighting | | Operating Temperature | -23° F (-5°C) to 113° F (45°C)
| | Material | Diecast Faceplate/Smooth Powder Coat Finish |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Optics: Louver face directs light downward to illuminate walkway with frosted glass lens to diffuse light.
Construction: Diecast faceplate with smooth powder coat finish. LED board and driver integrated into housing. Tamper-proof screws for mounting faceplate to box. Heavy duty aluminum housing.
Installation: Suitable for poured concrete and other wall and brick installation types. Housing equipped with two side brackets.
Electrical: Housing with 1/2" conduit knockout on each side suitable for thru-wiring. Ambient operating temperature -23°F (-5°C) to 113°F (45°C). Driver input of 120V 50/60Hz connects directly line voltage power.
LED Technology: 90+ CRI for extremely accurate color rendering. Lumen maintenance of 35,000 hours L70 life. LED Array.
Listings: cUL and cULus Listed for Wet Location. Listed for Poured Concrete. IC Rated for direct contact with insulation.
|
|
|
|
|
|
|
