 |
 |
 |
|
Part Number: LED-ALIN2-3FT-3P38-D-5CCT-WH
0-10V/Dimmable (Dim-To-Off/Flicker Free)
Selectable Wattage - 30/22.5/14.5w
Voltage - 120-277v
Lumens - 3,600/2,700/1,740lm
Selectable CCT - 27/30/35/40/50K
Beam Angle - 110°
Projected Life (L70) - 50,000 Hours
Finish - White
Length - 3' (ft)
Width - 2"
Height - 4"
Integrating a seamless, recessed glow into your ceiling becomes an effortless reality with the EnVisionLED - LED-ALIN2-3FT-3P38-D-5CCT-WH-TML - ARCY-LINE: 3' Architectural Linear Fixture (Trimless) - 3' - 30/22.5/14.5W - 5-CCT 27/30/35/40/50K - 120-277V - White from USA Light. This 3-foot trimless unit is engineered to blend directly into drywall, offering the best interior lighting for minimalist corridors, upscale galleries, and executive offices. As a premier contractor lighting supplier, we provide this LED lighting to professionals who prioritize a clean, hardware-free aesthetic without sacrificing performance.
One of the primary benefits of this commercial interior lighting solution is the 5-CCT selectable switch, which allows you to adjust the color temperature on-site to match any interior palette. By sourcing through our wholesale commercial lighting channels, you also gain the flexibility of three wattage settings to optimize energy consumption. Whether your project requires the precision of low-voltage interior lighting integration or a standard 120-277V architectural installation, this fixture delivers uniform, flicker-free illumination that enhances the visual value of any modern space. Get started today.
- The EnVisionLED ARCY-Line Architectural Linear Fixtures (Trimless) offer a 2" sleek and modern appearance with symmetrical light distribution. They can be surface, wall, recess, trim-less, or pendant mounted.
- Lens: Acrylic Frosted Lens Standard: efficiently emits the light through a high-quality acrylic lens, spreading it evenly and without causing glare - Optional Louver available (added fee's may apply)
- One piece aluminum extrusion housing that incorporates a precisely cut, smooth white extruded frosted lens that securely attaches to the body and allows easy removal for accessing the driver and LED board when needed.
- Solid aluminum end caps are included, Finished with corrosion free powder coat
- Fixture is pre-wired for daisy chain, No additional wiring is required for continuous run, Connector Brackets to link fixtures in a continuous run is included, Trimless Mount (can be serviced from below ceiling)
- ETL Listed, DLC Standard Listed, Approved For CA T24, FCC CFR 47, GCC Part 15, Subpart B:2017, IP Rating: Damp Location (IP44)
- 5 year limited factory warranty
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
- Voltage Rating/Type
| -
- 120-277V
| -
-
-
| Finish | -
| White | -
-
-
| Selectable Wattages | -
| 30 Watts/22.5 Watts/14.5 Watts | -
-
-
- Dimmable
| -
| YES/0-10V/Dim-To-OFF/Flicker Free | -
-
-
- Lumens
-
| -
| 3,600LM/2,700LM/1,740LM | -
-
-
| Selectable CCT | -
| 2700K/3000K/3500K/4000K/5000K | -
-
-
- CRI
-
| -
| >90 | -
-
-
- Projected Life (L70)
| -
50,000 Hours-
| -
-
-
| Thermal | -
- -4°F to 122°F
| -
-
-
- Lens
| -
| Frosted Acrylic | -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Pre-Installed Factory Add-On's (Fee's and Lead Times Vary):
90 Minute Emergency Backup
Bi-Level Motion and Daylight Sensor
SG-20KV-UNV: 20KV Surge Protector
Paint: Black, White, Gray Standard. Custom RAL Available
Call Our Customer Service Line For More Information: 1-877-235-0020
|
|
|
|
|
|
|
