Elite 4" Low Voltage Noise Free Non-IC Shallow Remodel Housing - 35W - MR16 - White
In stock
Part Number:BL4RE-S-35-120-AT-W
1
reviews
$72.99
Verified Reviews
Free Shipping Over $500
Secure Checkout
PAYMENT OPTIONS
Payment methods
PayPalVisaMastercardDiscover
MORE ABOUT THIS ITEM
DESCRIPTION
Part Number: BL4RE-S-35-120-AT-W
Dimmable
Wattage - 35W MAX Input Voltage - 120v Output Voltage - 12v Bulb Type - MR16 (not included) Color Temp/Lumens - Based on Bulb Choice Transformer - Electronic
Length - 11" Height - 3.625" Width - 4.375"
1 year limited factory warranty.
Small aperture, low voltage, thermally protected, remodel shallow housing. For fast and easy installation in existing plaster or mechanical ceilings from ½" to 1-3/8" thick. Four remodel clips are easily retractable for fixture removal if necessary. Accommodates up to 35W MR16 lamps. Junction box is provided with eight ½" KOs and four Romex knockouts with strain relief.
<b><br />HOUSING </b>- High temperature painted 22 gauge deep drawn single piece housing. Accommodates lamps up to 35W depending on trim used.<br /><br /><b>TRANSFORMER </b>- Class II dimming electronic transformer enhanced in heat dissipating cover attached to junction box cover.<br /><br /><b>BAR HANGERS</b> - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact, and the 90° pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.<br /><br /><b>INSTALLATION </b>- Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thickness from ½" to 1-3/8".<br /><br /><b>JUNCTION BOX</b> - ETL listed for damp location and has eight ½" KOs and four Romex knockouts with strain relief.<br /><br /><img src="https://cdn.shopify.com/s/files/1/0650/0646/9223/files/BL4RE-S-spec2.jpg?v=1775633587" width="572" height="154" /><br /><br />• Integral low voltage electronic transformer to eliminate noise and vibration, increasing lamp life and lighting quality.<br />• Thermally Protected Non-IC remodel housing.<br />• Can be installed from below the ceiling.<br />• Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from ½" to 1-3/8".<br />• Designed for accent and task lighting applications.<br />• Dependable, favorable design and effortless installation.<br />• 3-5/8" height allows use in 2" x 4" joist construction.<br />• Unit slips through 4-¼" ceiling opening.<br /><br />
<div>
</div><img src="https://cdn.shopify.com/s/files/1/0650/0646/9223/files/BL4RE-S-spec3-1.jpg?v=1775633592" /><br /><div class="left"><br />*Note: Not compatible with LED bulbs as they do not put enough load on the electronic transformer. Will cause premature failure. <br />We do not recommend pre-cutting any holes until housings are on site. <br />
</div>
<div class="clear">
</div>