<div>
• Thermally Protected IC housing.
</div>
<div>
• Designed for accent and task lighting applications.
</div>
<div>
• Wire through junction box.
</div>
<div>
• Preinstalled adjustable bar hanger.
</div>
<div>
• Dependable, favorable design and effortless installation.
</div>
<div>
• 5-½" height allows use in 2" x 6" joist construction.</div>
<div>
• Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
</div>
<div>
<br />
</div>
<div>
<div>
DESCRIPTION:
</div>
<div>
<br />
</div>
<div>
Small aperture line voltage, thermally protected, specification grade recessed housing. For new construction. Non-insulated ceilings or where insulation can be kept 3" from the housing. Accommodates up to 50W GU10 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four ½" KOs, one ¾" KO and four Romex knockouts with strain relief.</div>
</div>
<div>
<br />
</div>
<div>
SPECIFICATION:
</div>
<div>
<br />
</div>
<div>
A. HOUSING - High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate ½" to 1-3/8" ceiling. Accommodates lamps up to 50W depending on trim used.<br /><br />B. SOCKET- GU10 floating socket allows for lamp to snap into trim and provide secure lamp retention.<br /><br />C. BAR HANGERS - Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact, and the 90° pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots<br /><br />D. JUNCTION BOX - ETL listed for through-branch circuit wiring and has four ½" KOs,one ¾" KO and four Romex knockouts with true pry-out slots and strain clamps.</div>
<div class="left">
<br />
</div>